0512-57268109
sales@hctechgroup.com

EM4325

EM4325

18000-63 (Gen2) and 18000-64 (TOTAL) RFID IC

 

Description

EM4325 is a Gen2 IC that is compliant with ISO/IEC 1800063 and ISO/IEC 18000-64 (TOTAL). The chip offers an advanced feature set leading to a performance beyond that of standard Gen2 chips and can be either battery powered or beam powered by the RF energy transmitted from a reader. In a battery assisted passive (BAP) configuration, the EM4325 offers superior reading range and reliability compared to purely passive RFID solutions. EM4325 includes 4096 bits of high speed non-volatile memory (EEPROM) that is organized into 64 pages with 4 words per page. The chip supports either ISO or EPCTM data structures that are compliant with EPCglobal Tag Data Standards, Version 1.10, and is delivered with a Unique Identifier (UID) to ensure full traceability. An integrated temperature sensor is included in the EM4325 and supports the temperature range from -40°C to +60°C. The temperature sensor may be used in either purely passive or BAP applications. Temperature readings can be made on demand by a reader or the chip may be programmed to perform self-monitoring with alarm conditions. EM4325 supports advanced applications by providing programmable external interfaces for an auxiliary function and a 4-bit I/O port. The auxiliary function may be configured as an input for tamper detection or as an output for notification of RF events to external devices. The 4-bit I/O may be configured to support 4 discrete signals or as a Serial Peripheral Interface (SPI) bus. The chip may serve as either an SPI Master device or an SPI Slave device. The programmable external interfaces allow the EM4325 to function as an RF front end and protocol handler in advanced RFID tags or embedded applications.  In a passive configuration, the programmable external interfaces allow the EM4325 to serve as a SPI Master with energy harvesting and provide power to external components. Battery supply management is provided to prolong battery life in BAP applications. The chip supports programmable duty cycle control, auto-switching between battery powered and beam powered operation, and programmable enable/ disable of an ultra-low power mode for extended storage applications.

 

Features 

- ISO 18000-63 (Gen2) & 18000-64 (TOTAL) compliant

- AIAGTM B-11 compliant

- ATA Spec 2000 Low Memory Tag compliant

- 4096-bit non-volatile memory (EEPROM)

- 48-bit manufacturer programmed IC Serial Number

- 352 bits for UII/EPC encoding

- 3072 bits for User data / 3008 bits for TOTAL data

- 128-bit Register File

- BlockErase and BlockWrite commands for high speed  memory transactions

- BlockPermalock command for User memory

- TOTAL data rates: 64, 128, 160, 256, or 320 Kbps

- Coordinated Universal Time Clock (UTC)

- Integrated temperature sensor: -40°C to +60°C with typical accuracy of ±1.0°C over the full range and ±0.6°C over the typical range for cold chain

- Programmable monitoring and alarm conditions for temperature sensor including time stamp

- Programmable auxiliary function: input for tamper detection or output for notification of RF events

- Programmable 4-bit I/O port: configurable as 4 discrete signals or as a Serial Peripheral Interface (SPI) Bus

- Battery assistance for superior reading range and reading reliability

- Rectifier that allows purely passive operation in case the battery is flat or not present

- Battery supply management to prolong battery life

- Battery supply range: 1.25V to 3.6V 1)

- Low battery alarm threshold: 1.3V or 2.2V

- Extended temperature range: -40°C to +85°C

 

Applications

- RFID tags: Supply chain management, tracking and tracing, reusable containers and pallets, access control, asset control, cold chain monitoring, sensor monitoring, E-seals, Gen2 side-channel for active RFID tags

- RFID front end for embedded applications: Gen2 communications channel for wireless data exchange, configuration and control, RF event notification

苏州汇成芯通物联网科技有限公司
苏ICP备18043287号-1